Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wing Mirrors on a Suzuki Samurai

Model: Suzuki Samurai JB, JA, Sj40, Sj30 - Years 1989-2003
Part: Side mirror

In this brief guide, we will see the instructions to remove and replace the external wing mirror on a Suzuki Samurai. First, open the front door and start unscrewing the fixing screws found on the outer part next to the mirror itself. Then, pull the mirror from the outside, removing it and replacing it with the new one as shown in the video. Secure the mirror properly with its screws and finally adjust the glass, following the video tutorial to the end!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Valve Clearance on the Suzuki Samurai
How to Adjust the Valve Clearance on the Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) This guide provides instructions for adjusting the valve clearance on the Suzuki Samurai. First, open the bonnet of your car and start removing the p…
Replacing Front Headlights on a Suzuki Samurai
Replacing Front Headlights on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) In today's video, we will see how to remove and replace the original headlights on a Suzuki Samurai, following these simple steps. First, open the bo…
How to Replace the Wiper Arms on the Suzuki Samurai - Jimny
How to Replace the Wiper Arms on the Suzuki Samurai - Jimny
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) In today’s video tutorial, you will see how to remove and replace the wipers and their arms on the Suzuki Samurai, as well as the first series Jimny.…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos