Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cooling Radiator from a Suzuki Splash

Model: Suzuki Splash MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Radiator

Video tutorial

This guide provides instructions for removing and replacing the engine cooling radiator of the Suzuki Splash. First, open the bonnet of the vehicle and start by removing the bumper, unscrewing all the securing screws; then remove the screws from the radiator brackets and disconnect the coolant hose, as shown in the video.

At this point, disconnect the cooling fan from the radiator, replacing the component with the new original one; replace and pressurise the coolant after reassembling the radiator.


Posted on 19 April 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Suzuki Splash?
How to Replace the Air Filter on a Suzuki Splash?
Suzuki Splash (2008-2015 / MK 1) To replace the air filter on a Suzuki Splash, open the bonnet to access the components inside the engine bay. The air filter is located inside its bo…
How to Replace the Key Battery of the Suzuki Splash
How to Replace the Key Battery of the Suzuki Splash
Suzuki Splash (2008-2015 / MK 1) To replace the battery inside your Suzuki Splash key, you will need two small screwdrivers: one flat and one cross-head. First, unscrew the screw loc…
How to Reset the Service Light on the Suzuki Splash?
How to Reset the Service Light on the Suzuki Splash?
Suzuki Splash (2008-2015 / MK 1) To reset the Service light on the Suzuki Splash, turn on the instrument cluster by inserting the ignition key into the ignition switch. Once the clus…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos