Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Suzuki Splash?

Model: Suzuki Splash MK 1 - Years 2008-2015
Part: Service warning light

To reset the Service light on the Suzuki Splash, turn on the instrument cluster by inserting the ignition key into the ignition switch. Once the cluster is powered on, connect the scanner to the OBD port located just below the steering column. This will allow you to select the car model in question and then its corresponding version; doing so will remove the error that causes the light to illuminate, restoring it completely.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Suzuki Splash?
How to Reset the Service Light on a Suzuki Splash?
Suzuki Splash (2008-2015 / MK 1) To reset the Service light on a Suzuki Splash, turn the key to the 'on' position to activate the instrument cluster. Then, press and hold the button …
How to Reset the Service Light on a Suzuki Splash
How to Reset the Service Light on a Suzuki Splash
Suzuki Splash (2008-2015 / MK 1) The steps to reset the service light on a Suzuki Splash are few and quite simple. The video shows how to perform them. Get into the vehicle, insert t…
How to Reset the Service Light on a Suzuki Lapin
How to Reset the Service Light on a Suzuki Lapin
Suzuki Splash (2008-2015 / MK 1) In this tutorial, you will see how to reset the maintenance light on a Suzuki Splash by following simple steps: first, perform maintenance on the veh…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos