Do it yourself
| ||||
|
Suzuki Splash - Video tutorial
Model: Suzuki Splash
MK 1
- Years 2008-2015 The steps to perform in order to carry out the reset procedure of the service warning light in a Suzuki Splash car are few and quite simple, in the video in question we are shown how to perform them. We get on board the car, insert the key in the appropriate slot and then turn on the instrument panel without starting the vehicle. At this point we will use the â € œmodeâ € button under the speedometer on the left and press it several times until the kilometers are displayed and turn off the ignition. Turn the instrument panel back on and this time press the right button at the base of the speedometer and keep it pressed until the warning light starts flashing on the display, at this point we release the button and turn the ignition off and on again. The operation will therefore be concluded.
Posted on 2 August 2022 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |