Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Suzuki Splash?

Model: Suzuki Splash MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

Video tutorial

To reset the Service light on a Suzuki Splash, turn the key to the 'on' position to activate the instrument cluster. Then, press and hold the button located on the right side of the instrument cluster.

After a few seconds, turn the key to the 'off' position and immediately turn it back on. The display will show "Rec", at which point you can release the button as the reset of the light will be complete. To verify it has been done correctly, turn the instrument cluster off and then back on again.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Suzuki Splash
How to Reset the Service Light on a Suzuki Splash
Suzuki Splash (2008-2015 / MK 1) The steps to reset the service light on a Suzuki Splash are few and quite simple. The video shows how to perform them. Get into the vehicle, insert t…
How to Reset the Service Light on the Suzuki Splash?
How to Reset the Service Light on the Suzuki Splash?
Suzuki Splash (2008-2015 / MK 1) To reset the Service light on the Suzuki Splash, turn on the instrument cluster by inserting the ignition key into the ignition switch. Once the clus…
Removing the Cooling Radiator from a Suzuki Splash
Removing the Cooling Radiator from a Suzuki Splash
Suzuki Splash (2008-2015 / MK 1) This guide provides instructions for removing and replacing the engine cooling radiator of the Suzuki Splash. First, open the bonnet of the vehicle a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos