Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Splash
    4. : How to remove the rear bumper in the Suzuki Splash?

Suzuki Splash - Video tutorial

Model: Suzuki Splash MK 1 - Years 2008-2015
Part: Rear bumper
Operation: How to remove the rear bumper in the Suzuki Splash?

As we can see in this tutorial, removing the rear bumper in the Suzuki Splash is an extremely simple and fast operation. First of all we open the boot lid, then, with a 10mm socket wrench, we remove the fixing screws of both headlights and unscrew all the bolts placed along the upper edge of the bumper. Then unscrew the screws located inside the wheel arches, extract the plastic rivets positioned on the lower edge and separate the bumper from the frame starting from one of the two ends. To fit the spare, simply follow the reverse procedure.


Posted on 22 September 2022 by ScegliAuto

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos