Do it yourself
| ||||
|
Suzuki Splash - Video tutorial
Model: Suzuki Splash
MK 1
- Years 2008-2015 In this short guide we will see the main steps to be able to remove and replace the internal radiator of the passenger compartment heating of the Suzuki Splash. First we get on board the car and start by removing the steering wheel together with its airbag, unscrewing the fixing screws and disconnecting the electrical connector; then we go to disassemble the plastic parts of the dashboard, in order to access the radiator (which we find behind the dashboard). At this point we are going to disconnect the heating radiator pipes, accessing them from the engine compartment; we unscrew the screws of the bracket to remove it and replace it with the new one.
Posted on 25 June 2022 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |