Do it yourself
| ||||
|
Suzuki Baleno - Video tutorial
Model: Suzuki Baleno
MK 2
- Years 2015-2020 Do we want to remove the steering wheel airbag of a Suzuki Baleno? Let's see how the driver's side airbag is removed. Before disassembling the steering wheel of the car, we must remove the plastics covering the steering wheel barrel. We unscrew the tightening screws placed under the plastics: holes in the cover plastics. After removing the plastic covers around the steering tube, insert the screwdriver into the slots on the rear of the steering wheel and unhook the clips that hook the airbag. Once the airbag has been removed, we immediately disconnect the power supply terminals and extract the same from the steering wheel. To reassemble the airbag: connect the power supply terminal, then press the same on the steering wheel with our hands until it is completely blocked.
Posted on 4 February 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |