Do it yourself
| ||||
|
Suzuki Baleno - Video tutorial
Model: Suzuki Baleno
MK 2
- Years 2015-2020 In order to remove the front bumper of the Suzuki Baleno you have to go to open the hood, so that you can go to access the components in the upper part of the bumper. Here the fixing screws will be accessible as well as the rivets, which will have to be loosened so that the bumper can be detached. When the old bumper has been detached, it will be necessary to place the new one in its housing: after it has been inserted, it will be necessary to fix it by inserting the appropriate screws in the upper part of the bumper and also going to insert the rivets removed previously.
Posted on 2 May 2024 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |