Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Suzuki Swift GTI

Model: Suzuki Swift Rs41, AZG, MK 5 - Years 2010-2017
Part: Front bumper

Removing the front bumper of a Suzuki Swift is a straightforward task that you can do yourself, aided by our video tutorial that briefly explains how to perform this procedure. The first thing to know is that the Swift has a bumper divided into three parts connected by a pipe located on both the right and left sides. However, you will not be able to remove the bolts of the pipe to take off the bumper; you will need to do it part by part. Start by removing the upper bolts located just above. Once those are removed, proceed to take off the second part of the bumper, remove the headlights, and then focus on the pipes. Finally, remove the lower part of the bumper.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the front headlight of the Suzuki Swift?
How do you remove the front headlight of the Suzuki Swift?
Suzuki Swift (2017-2024 / MK 6, A2L) To remove the front headlight of the Suzuki Swift, you need to loosen the screws that secure the front bumper to its housing, so that the bumper can …
How to remove the front bumper in the Suzuki Swift?
How to remove the front bumper in the Suzuki Swift?
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) In this tutorial we can see how to remove the front bumper on the Suzuki Swift, a very simple and quick operation. First, we open the hood, then we u…
How to Remove the Front Bumper from a Suzuki Swift
How to Remove the Front Bumper from a Suzuki Swift
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) How do you remove the front bumper? Let’s see how to remove the bumper from the Swift. First, lift the front bonnet to access the bumper securing scr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos