Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper from a Suzuki Swift

Model: Suzuki Swift Rs41, AZG, MK 5 - Years 2010-2017
Part: Front bumper

How do you remove the front bumper? Let’s see how to remove the bumper from the Swift. First, lift the front bonnet to access the bumper securing screws. Unscrew the securing screws located at the top of the bumper (use an appropriate tool for removal). Once the top screws are removed, unscrew the screws located in the wheel arch liners. Lift the car with a jack and remove the rivets at the bottom of the bumper. Remove the bumper from the body of the vehicle by hand, perform the necessary maintenance, and install the new bumper or the same one that was removed earlier.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on a Suzuki Swift
How to Remove the Front Bumper on a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Follow these steps to remove the front bumper on a Suzuki Swift: lift the bonnet and secure it. Using a battery-powered screwdriver or a manual screw…
Removing the Rear Bumper on a Suzuki Swift (2018)
Removing the Rear Bumper on a Suzuki Swift (2018)
Suzuki Swift (2017-2024 / MK 6, A2L) In this guide, you will learn the steps needed to remove the rear bumper on a 2018 Suzuki Swift. First, open the boot and unscrew the fixing screws o…
How to Remove the Rear Bumper on a Suzuki Swift?
How to Remove the Rear Bumper on a Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) As you can see in this tutorial, removing the rear bumper on a Suzuki Swift is a very simple and quick operation. To do this, you will only need a 10…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos