Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Suzuki
  4. :
  5. Swift
  6. : Front bumper

Suzuki Swift - Front bumper

Suzuki Swift (2010-2017 / AZG, Rs41, MK 5)
How to remove the front bumper of the Suzuki Swift GTI.

Removing the front bumper of a Suzuki Swift is a very simple operation to do independently, thanks to our video tutorial that will briefly explain how to …read all…
Posted on 18 May 2023 by ScegliAuto
Suzuki Swift (2010-2017 / AZG, Rs41, MK 5)
How to remove the front bumper of the Suzuki Swift

How do you remove the front bumper? Let's see how the Swift's bumper is removed. To begin with, we lift the front hood to access the bumper clamp screws. We …read all…
Posted on 21 January 2024 by ScegliAuto
Suzuki Swift (2004-2010 / Rs41, MK 4)
How to remove the front bumper on Suzuki Swift

Let's see in this video how to proceed with the disassembly of the front bumper on Suzuki Swift: let's raise the engine hood and put it in safety. With a …read all…
Posted on 24 October 2023 by ScegliAuto

Airbags (1) Shock absorbers (4) Antenna (1) Car stereo (11) Battery (9) Gearbox (4) Spark plugs (6) Glow plugs (1) Soft top (1) Bodywork (4) Key (13) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (16) Checks and maintenance (61) Dashboard (2) Bearing (2) Headlight (2) Tail light (9) Fog lights (2) Air filter (9) Cabin air filter (10) Diesel filter (1) Oil filter (3) Hand brake (2) Clutch (1) Xenon headlight kit (1) Light bulb (1) Headlight bulb (15) Rear light bulb (9) Interior lights ceiling light bulb (3) License plate light (1) Third brake light (1) Handle (1) Gear oil (1) Engine oil (7) Door panel (5) Front bumper (3) Rear bumper (2) Brake pads (2) Tires (1) Gear Shift Knob (7) Push button (1) Instrument cluster (14) Fuse box (28) Suspensions (2) Outside rearview mirror (1) Manufacturer's coat of arms (1) Windscreen wipers (2) Engine head (1) EGR valve (1) Steering wheel (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos