Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Swift
    4. : Brake pads

Suzuki Swift - Brake pads

Suzuki Swift (1994-2004 / MK 3)
How do you replace the front brake pads on a Suzuki Swift?
Replacing the front brake pads on a Suzuki Swift involves lifting the car so that the corresponding wheels are not in contact with the ground. At this point, …read all…
Posted on 9 April 2023 by ScegliAuto
Suzuki Swift (2004-2010 / Rs41, MK 4)
How to replace Suzuki Swift brake pads
As a first operation it will be necessary in the meantime to remove the wheel in question of course, so after placing your car safely on the pedestals remove …read all…
Posted on 22 September 2023 by ScegliAuto
Airbags (1) Shock absorbers (4) Antenna (1) Car stereo (11) Battery (9) Gearbox (4) Spark plugs (6) Glow plugs (1) Soft top (1) Bodywork (4) Key (13) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (16) Checks and maintenance (61) Dashboard (2) Bearing (2) Headlight (2) Tail light (9) Fog lights (2) Air filter (9) Cabin air filter (10) Diesel filter (1) Oil filter (3) Hand brake (2) Clutch (1) Xenon headlight kit (1) Light bulb (1) Headlight bulb (15) Rear light bulb (9) Interior lights ceiling light bulb (3) License plate light (1) Third brake light (1) Handle (1) Gear oil (1) Engine oil (7) Door panel (5) Front bumper (3) Rear bumper (2) Brake pads (2) Tires (1) Gear Shift Knob (7) Push button (1) Instrument cluster (14) Fuse box (28) Suspensions (2) Outside rearview mirror (1) Manufacturer's coat of arms (1) Windscreen wipers (2) Engine head (1) EGR valve (1) Steering wheel (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos