Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Suzuki
  4. :
  5. Swift
  6. : Oil filter

Suzuki Swift - Oil filter

Suzuki Swift (2010-2017 / AZG, Rs41, MK 5)
How to replace the oil filter on the Suzuki Swift

Today we will explain how to replace the oil filter on a 2017 Suzuki Swift vehicle. The first thing to do is to open the hood and immediately remove the oil …read all…
Posted on 4 April 2024 by ScegliAuto
Suzuki Swift (1994-2004 / MK 3)
How to replace the oil filter on a Suzuki Swift.

In this video tutorial, we can see how it is possible to replace the oil filter on a Suzuki Swift by following a few simple steps: the first thing to do is to …read all…
Posted on 28 June 2023 by ScegliAuto
Suzuki Swift (2004-2010 / Rs41, MK 4)
Where is the oil filter in the Suzuki Swift and how to replace it?

In this video we can see where the oil filter is located in the Suzuki Swift and how to proceed in case we need to replace it, an operation included in the oil …read all…
Posted on 19 April 2023 by ScegliAuto

Airbags (1) Shock absorbers (4) Antenna (1) Car stereo (11) Battery (9) Gearbox (4) Spark plugs (6) Glow plugs (1) Soft top (1) Bodywork (4) Key (13) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (16) Checks and maintenance (61) Dashboard (2) Bearing (2) Headlight (2) Tail light (9) Fog lights (2) Air filter (9) Cabin air filter (10) Diesel filter (1) Oil filter (3) Hand brake (2) Clutch (1) Xenon headlight kit (1) Light bulb (1) Headlight bulb (15) Rear light bulb (9) Interior lights ceiling light bulb (3) License plate light (1) Third brake light (1) Handle (1) Gear oil (1) Engine oil (7) Door panel (5) Front bumper (3) Rear bumper (2) Brake pads (2) Tires (1) Gear Shift Knob (7) Push button (1) Instrument cluster (14) Fuse box (28) Suspensions (2) Outside rearview mirror (1) Manufacturer's coat of arms (1) Windscreen wipers (2) Engine head (1) EGR valve (1) Steering wheel (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos