Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter of the Suzuki Swift 3

Model: Suzuki Swift MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Oil filter

See other generations:
Video tutorial

This guide explains how to replace the oil filter and engine oil in a Suzuki Swift model 3. To perform the oil change, lift the vehicle using a ramp or axle stands. After lifting the car, remove the nut that secures the oil sump and allow the oil to drain into a container.

Open the nut that secures the oil filter cover and proceed with replacing the oil filter. Finally, lower the car back to the ground.

Open the front bonnet and remove the oil filler cap to top up the oil.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Suzuki Swift
How to replace the cabin air filter of the Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) If you own a Suzuki Swift and are wondering how you can replace the cabin air filter yourself, then all you have to do is read the following guide an…
Engine Oil and Oil Filter Replacement for Suzuki Swift
Engine Oil and Oil Filter Replacement for Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) This short guide will provide the necessary instructions to carry out routine maintenance by replacing the engine oil and oil filter on a Suzuki Swif…
How to Replace the Oil Filter on the Suzuki Swift
How to Replace the Oil Filter on the Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) This guide explains how to replace the oil filter on a 2017 Suzuki Swift. First, open the bonnet and remove the oil filler cap located near the engin…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos