Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the oil filter on the Suzuki Swift MK3

Model: Suzuki Swift MK 6, A2L - Years 2017-2024
Part: Oil filter

In this video, we will see how to easily change the oil filter on the Suzuki Swift MK3: we will need to lift the car in order to get underneath; we will loosen the oil filter with a ratchet wrench; place a container underneath the filter to catch the oil that may spill out when we remove it. We will then dispose of the oil at an authorized center. Remove the filter, clean the area, and replace it with a new and clean filter, screwing it in with the same ratchet wrench. Now drain the old oil by opening the oil pan plug into the same container: screw the plug back in (but it would be a good idea to replace it), lower the car, and refill the oil through the cap located in the engine compartment. Run the engine for a few minutes and then check the level; top up if necessary.

Posted on 22 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the oil filter of the Suzuki Swift 3
How to replace the oil filter of the Suzuki Swift 3
Suzuki Swift (1994-2004 / MK 3) Today we will explain how to replace the oil filter and engine oil inside the Suzuki Swift model 3. To perform the oil change inside the vehicle, it …
Engine Oil and Oil Filter Replacement for Suzuki Swift
Engine Oil and Oil Filter Replacement for Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) This short guide will provide the necessary instructions to carry out routine maintenance by replacing the engine oil and oil filter on a Suzuki Swif…
How to change oil and filter on the Suzuki Swift II diesel.
How to change oil and filter on the Suzuki Swift II diesel.
Suzuki Swift (1988-2003 / MK 2) Let's see how to change the engine oil and filter of a Suzuki Swift II diesel. First, unscrew the filler cap to allow the oil to drain more easily. L…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos