Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for Suzuki Swift

Model: Suzuki Swift MK 4, Rs41 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine oil

See other generations:
Video tutorial

This short guide will provide the necessary instructions to carry out routine maintenance by replacing the engine oil and oil filter on a Suzuki Swift. First, raise the vehicle and start unscrewing the oil drain bolt found on the sump, allowing it to drain into a container for about ten minutes; then, unscrew the oil filter using the appropriate tool, replacing the cartridge with a new one as shown in the video.

At this point, unscrew the filler cap and top up with new oil that has the same specifications.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

Where is the Oil Filter Located on the Suzuki Swift and How to Replace It?
Where is the Oil Filter Located on the Suzuki Swift and How to Replace It?
Suzuki Swift (2004-2010 / MK 4, Rs41) In this video, you can see where the oil filter is located on the Suzuki Swift and how to proceed if you need to replace it, which is included in the…
How to Replace the Oil Filter of the Suzuki Swift 3
How to Replace the Oil Filter of the Suzuki Swift 3
Suzuki Swift (1994-2004 / MK 3) This guide explains how to replace the oil filter and engine oil in a Suzuki Swift model 3. To perform the oil change, lift the vehicle using a ramp …
How to Change the Oil and Oil Filter on a Suzuki Swift
How to Change the Oil and Oil Filter on a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) To change the oil and oil filter on a Suzuki Swift, start by going under the car. Unscrew the oil drain plug with a 17 mm spanner and let the oil dra…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos