Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the oil and oil filter in the Suzuki Swift.

Model: Suzuki Swift AZG, MK 5, Rs41 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Engine oil

See other generations:
Video tutorial

Below you will find instructions on how to replace the oil and the oil filter in your Suzuki Swift. The steps are very simple and quick, as we will see in this short video.

First, let's lift the car on the ramps so that we can access the underside. At this point, we need to locate the oil pan and its corresponding filter.

Once found, we will unscrew the plug of the pan and, using a container, we will collect the used oil. We do the same with the filter. After that, we proceed to replace the old filter with a new one and, if possible, we also change the pan plug.

Once we have completed these steps, we can proceed to add new oil to our car.


Posted on 15 December 2025 by ScegliAuto


Related tutorials

How to Change the Oil and Oil Filter on a Suzuki Swift
How to Change the Oil and Oil Filter on a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) To change the oil and oil filter on a Suzuki Swift, start by going under the car. Unscrew the oil drain plug with a 17 mm spanner and let the oil dra…
Engine Oil and Oil Filter Replacement for Suzuki Swift
Engine Oil and Oil Filter Replacement for Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) This short guide will provide the necessary instructions to carry out routine maintenance by replacing the engine oil and oil filter on a Suzuki Swif…
How to change the oil filter on the Suzuki Swift MK3
How to change the oil filter on the Suzuki Swift MK3
Suzuki Swift (2017-2024 / MK 6, A2L) In this video, we will see how to easily change the oil filter on the Suzuki Swift MK3: we will need to lift the car in order to get underneath; we w…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos