Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil and Oil Filter on a Suzuki Swift

Model: Suzuki Swift MK 4, Rs41 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine oil

See other generations:
Video tutorial

To change the oil and oil filter on a Suzuki Swift, start by going under the car. Unscrew the oil drain plug with a 17 mm spanner and let the oil drain into a container. Once the oil has drained, clean the drain plug and screw it back in place.

Next, unscrew the oil filter using a specific tool, allowing the oil to drain into a container. After the oil has drained, take the new oil filter, apply some new oil to it, and screw it in place of the old one. Now go to the engine, pour in the litres specified by the manufacturer.

When you are close to the indicated litres, start the engine, check the oil, and top up if necessary.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Filter on the Suzuki Swift
How to Replace the Oil Filter on the Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) This guide explains how to replace the oil filter on a 2017 Suzuki Swift. First, open the bonnet and remove the oil filler cap located near the engin…
Where is the Oil Filter Located on the Suzuki Swift and How to Replace It?
Where is the Oil Filter Located on the Suzuki Swift and How to Replace It?
Suzuki Swift (2004-2010 / MK 4, Rs41) In this video, you can see where the oil filter is located on the Suzuki Swift and how to proceed if you need to replace it, which is included in the…
Engine Oil and Oil Filter Replacement for Suzuki Swift
Engine Oil and Oil Filter Replacement for Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) This short guide will provide the necessary instructions to carry out routine maintenance by replacing the engine oil and oil filter on a Suzuki Swif…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos