|
Do it yourself
| |||
| ||||
How to change oil and filter on the Suzuki Swift II diesel.
Model: Suzuki Swift
MK 2
- Years 1988-2003
Let's see how to change the engine oil and filter of a Suzuki Swift II diesel. First, unscrew the filler cap to allow the oil to drain more easily. Lift the front of the car, place a container under the oil pan, and unscrew the drain plug. The diesel Swift has a cartridge filter, so we will also need to place a container under the filter flange to collect the oil that spills out. Remove the old gasket and thoroughly clean the gasket seat and the inside of the flange. Then, install the new cartridge with the new gasket, which we will have lubricated with a bit of clean oil. Tighten the cover by hand and secure it to 25 Nm. Replace the drain bolt and gasket of the oil pan with new ones and pour in the new engine oil up to the 906 mark of the total quantity. Start the engine and let it run for 30 seconds to fill the filter. Check the oil level and add oil until we reach the "max" level on the dipstick. Properly dispose of the used oil and the old filter at an authorized center.
Posted on 4 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Suzuki Swift
(2017-2024 /
MK 6, A2L)
In this video, we will see how to easily change the oil filter on the Suzuki Swift MK3: we will need to lift the car in order to get underneath; we w…
Suzuki Swift
(2004-2010 /
MK 4, Rs41)
Before you begin, lift the front of your Suzuki Swift to access the oil drain plug. Start by loosening and removing this plug. Once done, wait for al…
Suzuki Swift
(2004-2010 /
MK 4, Rs41)
If you own a Suzuki Swift and are wondering how you can replace the cabin air filter yourself, then all you have to do is read the following guide an…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.328
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |