Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Swift
    4. : Blower motor

Suzuki Swift - Blower motor

Blower Motor Suzuki Swift (2004-2010 / mk 4, rs 41)

Suzuki Swift (2004-2010 / MK 4, Rs41)
How to replace the fan motor of the Suzuki Swift
Let's see how to replace the fan motor of the Suzuki Swift: position yourself on the passenger side and lie down with your head under the dashboard, in the …Read all…
Posted on 2 October 2025 by ScegliAuto
Airbag (1) Alternator (2) Shocks (4) Antenna (5) Air conditioning (1) Car stereo (17) Battery (9) Ignition coil (1) Transmission (5) Spark plugs (8) Glow plugs (2) Convertible top (1) Body (8) Key (36) Timing belt (11) V-belt (1) Onboard computer (8) Checks and maintenance (20) Throttle body (2) Dashboard (4) Bearing (2) Headlight (5) Tail light (12) Fog lights (2) Air filter (13) Cabin air filter (17) Diesel fuel filter (2) Oil filter (5) Parking brake (2) Clutch (3) Xenon headlight kit (1) Light bulb (2) Headlight bulb (28) Tail light bulb (11) Interior dome light bulb (4) License plate light (4) (2) Handle (1) Transmission fluid (1) Engine oil (10) Clock (65) Door trim panel (7) Front bumper (4) Rear bumper (2) Brake pads (2) Tires (2) Shift knob (11) Instrument cluster (6) Fuse box (54) Seat (1) Suspension system (2) Side mirror (1) Warning light – error code (10) (9) Tire pressure warning light (16) Service warning light (68) Manufacturer emblem (2) Fuel cap (7) Windshield wipers (4) Thermostat (1) Cylinder head (1) EGR valve (2) Blower motor (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos