Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Swift
    4. : Fog lights

Suzuki Swift - Fog lights

Suzuki Swift (2004-2010 / Rs41, MK 4)
Replacement of the rear fog light bulb of the Suzuki Swift.
The steps illustrated in this guide will show us how to disassemble and replace the rear fog light bulb of the Suzuki Swift. First, let's move to the back and …read all…
Posted on 5 February 2024 by ScegliAuto
Suzuki Swift (2010-2017 / AZG, Rs41, MK 5)
How to change front fog light bulbs on Suzuki Swift 5
In this guide, let's find out how to disassemble and replace the front fog light bulbs of the Suzuki Swift fifth series, in simple steps. First of all let's …read all…
Posted on 24 November 2022 by ScegliAuto
Airbags (1) Shock absorbers (4) Antenna (1) Car stereo (11) Battery (9) Gearbox (4) Spark plugs (6) Glow plugs (1) Soft top (1) Bodywork (4) Key (13) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (16) Checks and maintenance (61) Dashboard (2) Bearing (2) Headlight (2) Tail light (9) Fog lights (2) Air filter (9) Cabin air filter (10) Diesel filter (1) Oil filter (3) Hand brake (2) Clutch (1) Xenon headlight kit (1) Light bulb (1) Headlight bulb (15) Rear light bulb (9) Interior lights ceiling light bulb (3) License plate light (1) Third brake light (1) Handle (1) Gear oil (1) Engine oil (7) Door panel (5) Front bumper (3) Rear bumper (2) Brake pads (2) Tires (1) Gear Shift Knob (7) Push button (1) Instrument cluster (14) Fuse box (28) Suspensions (2) Outside rearview mirror (1) Manufacturer's coat of arms (1) Windscreen wipers (2) Engine head (1) EGR valve (1) Steering wheel (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos