Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Swift
    4. : Suspensions

Suzuki Swift - Suspensions

Suzuki Swift (2004-2010 / Rs41, MK 4)
Replacement of Suzuki Swift rear shock absorbers
In this video tutorial we will see how to disassemble and replace the Suzuki Swift rear shock absorbers, following the instructions below. First of all we lift …read all…
Posted on 23 August 2022 by ScegliAuto
Suzuki Swift (2004-2010 / Rs41, MK 4)
Removing the front shock absorbers Suzuki Swift 3
In this video we will see how to remove and replace the front shock absorbers on a Suzuki Swift third series. First of all, let's lift the car and remove the …read all…
Posted on 1 January 2024 by ScegliAuto
Airbags (1) Shock absorbers (4) Antenna (1) Car stereo (11) Battery (9) Gearbox (4) Spark plugs (6) Glow plugs (1) Soft top (1) Bodywork (4) Key (13) Timing belt (8) V-belt (1) Air conditioning controls (1) -board computer (16) Checks and maintenance (61) Dashboard (2) Bearing (2) Headlight (2) Tail light (9) Fog lights (2) Air filter (9) Cabin air filter (10) Diesel filter (1) Oil filter (3) Hand brake (2) Clutch (1) Xenon headlight kit (1) Light bulb (1) Headlight bulb (15) Rear light bulb (9) Interior lights ceiling light bulb (3) License plate light (1) Third brake light (1) Handle (1) Gear oil (1) Engine oil (7) Door panel (5) Front bumper (3) Rear bumper (2) Brake pads (2) Tires (1) Gear Shift Knob (7) Push button (1) Instrument cluster (14) Fuse box (28) Suspensions (2) Outside rearview mirror (1) Manufacturer's coat of arms (1) Windscreen wipers (2) Engine head (1) EGR valve (1) Steering wheel (1)

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos