Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Shock Absorbers of the Suzuki Swift

Model: Suzuki Swift MK 4, Rs41 - Years 2004-2010
Part: Suspension system

In this video tutorial, learn how to remove and replace the rear shock absorbers of the Suzuki Swift by following the instructions below. First, lift the vehicle and start by removing the rear wheel; then disconnect the suspension by unscrewing the bolt on the lower part, as shown in the video. Next, open the boot and remove the side cover; then unscrew the nut of the suspension to remove it from the vehicle. Now replace everything, following the video until the end!

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of Front Shock Absorbers on Suzuki Swift 3
Disassembly of Front Shock Absorbers on Suzuki Swift 3
Suzuki Swift (2004-2010 / MK 4, Rs41) In this video, you will learn how to disassemble and replace the front shock absorbers on a third-generation Suzuki Swift. First, lift the vehicle an…
What does the TPMS light on the Suzuki Swift indicate?
What does the TPMS light on the Suzuki Swift indicate?
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) When the TPMS light on a Suzuki vehicle comes on, it means that it is necessary to check the tire pressure. The tire pressure varies depending on the…
Instructions for Installing Rear Shock Absorbers
Instructions for Installing Rear Shock Absorbers
Suzuki Swift (2004-2010 / MK 4, Rs41) Replacing the rear shock absorbers is relatively easy since the damper and spring are not co-axial; start by opening the rear hatch and removing the …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos