Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of Front Shock Absorbers on Suzuki Swift 3

Model: Suzuki Swift MK 4, Rs41 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Suspension system

See other generations:
Video tutorial

In this video, you will learn how to disassemble and replace the front shock absorbers on a third-generation Suzuki Swift. First, lift the vehicle and remove the front wheel; then unscrew the upper suspension bolt and unscrew the pins connecting the arm to the braking system, as shown in the video.

At this point, access the engine bay to remove the upper plastic cover and unscrew the suspension fixing bolt; then extract it from below, replacing it with the new one. Follow the video to the end for reassembly!


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Replacing the Rear Shock Absorbers of the Suzuki Swift
Replacing the Rear Shock Absorbers of the Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) In this video tutorial, learn how to remove and replace the rear shock absorbers of the Suzuki Swift by following the instructions below. First, lift…
How to Perform a Service Reset on a Suzuki Swift
How to Perform a Service Reset on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) On the Suzuki Swift, the maintenance interval and oil change reset is done from the instrument cluster. With the Suzuki Swift stationary and the engi…
Remove the Headlight Bulbs on a Suzuki Swift
Remove the Headlight Bulbs on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) Remove the headlight bulbs and replace them on a Suzuki Swift. Open the bonnet by pulling the lever located at the bottom right of the dashboard and …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos