Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads of the Suzuki Swift

Model: Suzuki Swift MK 4, Rs41 - Years 2004-2010
Part: Brake pads

As the first step, you will need to remove the relevant wheel. After securing your vehicle on axle stands, remove the wheel and start unscrewing the bolts located on the back of the piston. This will allow you to release the brake pads. Then, install the new pads and give a good clean against any rust that has formed in the areas affected by the installation of the pads. Now, just remount the bolts and retrace the steps in reverse for reassembling the remaining components.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of a Suzuki Swift
How to Change the Engine Oil of a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Before you begin, lift the front of your Suzuki Swift to access the oil drain plug. Start by loosening and removing this plug. Once done, wait for al…
How to Replace the Front Brake Pads on a Suzuki Swift
How to Replace the Front Brake Pads on a Suzuki Swift
Suzuki Swift (1994-2004 / MK 3) To replace the front brake pads on a Suzuki Swift, lift the car so that the corresponding wheels are off the ground. You can then unscrew the bolts s…
How to Perform a Service Reset on a Suzuki Swift
How to Perform a Service Reset on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) On the Suzuki Swift, the maintenance interval and oil change reset is done from the instrument cluster. With the Suzuki Swift stationary and the engi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos