Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Suzuki Swift

Model: Suzuki Swift MK 4, Rs41 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Front bumper

See other generations:
Video tutorial

Follow these steps to remove the front bumper on a Suzuki Swift: lift the bonnet and secure it. Using a battery-powered screwdriver or a manual screwdriver, unscrew the fastening pins located at the top of the bumper. Once the screws or plastic rivets at the top are removed, unscrew the pins from the wheel arch liners and finally remove the pins located at the bottom of the bumper.

Carefully pull the bumper away from the vehicle body. To reassemble, position the bumper onto the vehicle body and proceed to tighten all screws around the wheel arch liners and the perimeter.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper from a Suzuki Swift
How to Remove the Front Bumper from a Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) How do you remove the front bumper? Let’s see how to remove the bumper from the Swift. First, lift the front bonnet to access the bumper securing scr…
How to Remove the Front Bumper of the Suzuki Swift GTI
How to Remove the Front Bumper of the Suzuki Swift GTI
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Removing the front bumper of a Suzuki Swift is a straightforward task that you can do yourself, aided by our video tutorial that briefly explains how…
Removing the Rear Bumper on a Suzuki Swift (2018)
Removing the Rear Bumper on a Suzuki Swift (2018)
Suzuki Swift (2017-2024 / MK 6, A2L) In this guide, you will learn the steps needed to remove the rear bumper on a 2018 Suzuki Swift. First, open the boot and unscrew the fixing screws o…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos