Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Suzuki Swift

Model: Suzuki Swift MK 6, A2L - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Battery

See other generations:
Video tutorial

Today we will see step by step instructions on how to disassemble and replace the battery of the Suzuki Swift. First, we open the hood of the car and start unscrewing the two fixing nuts of the central bracket of the battery; then we disconnect both battery terminals (positive and negative poles), as shown in the video.

At this point we remove the battery from its compartment, replacing it with the new one (of the correct type and with the same amperage); we insert the battery in the correct direction and make the electrical connection, then starting the engine!


Posted on 4 September 2025 by ScegliAuto


Related tutorials

How to Replace the Battery in a Suzuki Swift
How to Replace the Battery in a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) To replace the battery in a Suzuki Swift, open the bonnet to access the components inside the engine bay. On the right side, you will find the batter…
How to Replace the Battery in the Suzuki Swift
How to Replace the Battery in the Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Below are the necessary instructions to remove and replace the battery in the Suzuki Swift, following these simple and quick steps. First, open the b…
How to replace the battery of a Suzuki Swift key?
How to replace the battery of a Suzuki Swift key?
Suzuki Swift (2004-2010 / MK 4, Rs41) To replace the battery of a Suzuki Swift key, start by locating the screw located on the back of the key. Use a small screwdriver to unscrew this scr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos