Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Antenna from a Suzuki Splash

Model: Suzuki Splash MK 1 - Years 2008-2015
Part: Antenna

Today, in this brief and simple guide, you will find the main instructions on how to remove and replace the antenna on a Suzuki Splash, as well as an Opel Agila. First, unscrew the antenna from its base to remove it. Then, get inside the vehicle and remove the interior light fixture as shown in the video. Next, unscrew the fastening nut of the antenna base and disconnect the cable to remove it. Install the new base and consequently the new antenna, following the video tutorial to the end!

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Heater Radiator from a Suzuki Splash
How to Remove the Heater Radiator from a Suzuki Splash
Suzuki Splash (2008-2015 / MK 1) In this brief guide, you will see the main steps to remove and replace the internal heater radiator of the Suzuki Splash. First, get inside the vehic…
How to Remove the Rear Bumper on a Suzuki Splash
How to Remove the Rear Bumper on a Suzuki Splash
Suzuki Splash (2008-2015 / MK 1) As shown in this tutorial, removing the rear bumper on a Suzuki Splash is an extremely simple and quick operation. First, open the boot lid, then, us…
Removing the Cooling Radiator from a Suzuki Splash
Removing the Cooling Radiator from a Suzuki Splash
Suzuki Splash (2008-2015 / MK 1) This guide provides instructions for removing and replacing the engine cooling radiator of the Suzuki Splash. First, open the bonnet of the vehicle a…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos