Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Suzuki Splash?

Model: Suzuki Splash MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car stereo

Video tutorial

You can replace the radio in a Suzuki Splash by prying with an object to detach the trim panel around the gear lever: once this panel is removed, open the drawer above the radio to loosen the screws inside. By unscrewing these screws, you can detach the trim that surrounds the radio and locate the screws underneath: these can now be loosened so that the device is freed and disconnected.

Then, connect the new radio by inserting it into its slot and securing it with screws.


Posted on 10 March 2026 by ScegliAuto


Related tutorials

Where are the Fuses Located in the Suzuki Splash?
Where are the Fuses Located in the Suzuki Splash?
Suzuki Splash (2008-2015 / MK 1) Each fuse in the Suzuki Splash is located inside the dedicated fuse box installed in the vehicle. This type of vehicle has a single box for containin…
How to Reset the Service Light on the Suzuki Splash?
How to Reset the Service Light on the Suzuki Splash?
Suzuki Splash (2008-2015 / MK 1) To reset the Service light on the Suzuki Splash, turn on the instrument cluster by inserting the ignition key into the ignition switch. Once the clus…
How to Replace the Front Headlamp Bulb on a Suzuki Splash?
How to Replace the Front Headlamp Bulb on a Suzuki Splash?
Suzuki Splash (2008-2015 / MK 1) To replace the front headlamp bulb on a Suzuki Splash, open the bonnet to access the components inside the engine bay. Here, you will locate the inte…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos