Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Suzuki Splash?

Model: Suzuki Splash MK 1 - Years 2008-2015
Part: Headlight bulb

To replace the front headlamp bulb on a Suzuki Splash, open the bonnet to access the components inside the engine bay. Here, you will locate the internal protection panel of the corresponding headlamp unit. Remove this panel to disconnect the connector attached to the bulb, allowing you to pull it out of its housing. Connect the new replacement bulb to this same connector, then insert it back into its socket, ensuring everything works correctly.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Suzuki Splash?
How to Replace the Air Filter on a Suzuki Splash?
Suzuki Splash (2008-2015 / MK 1) To replace the air filter on a Suzuki Splash, open the bonnet to access the components inside the engine bay. The air filter is located inside its bo…
How to replace the front headlight bulbs in the Suzuki Splash?
How to replace the front headlight bulbs in the Suzuki Splash?
Suzuki Splash (2008-2015 / MK 1) In this tutorial we can see how to replace the front headlight bulbs in the Suzuki Splash, an extremely simple and quick operation. First of all, mak…
How to Change the Brake Light Bulb on the Suzuki Splash
How to Change the Brake Light Bulb on the Suzuki Splash
Suzuki Splash (2008-2015 / MK 1) Learn how to change the rear light bulb on a Suzuki Splash: you will need a dual filament bulb (P21/5W) that manages both the sidelights and the brak…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos