Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Suzuki Splash?

Model: Suzuki Splash MK 1 - Years 2008-2015
Part: Headlight bulb

In this tutorial we can see how to replace the front headlight bulbs in the Suzuki Splash, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the hood and disconnect the connector located on the back of the headlight in question. Next, remove the large rubber cap, unhook the metal clip, and remove the old bulb from the housing. At this point, we can insert the replacement, avoiding touching the glass directly with bare hands, and reassemble everything following the exact reverse procedure.

Posted on 16 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Suzuki Splash?
How to Replace the Front Headlamp Bulb on a Suzuki Splash?
Suzuki Splash (2008-2015 / MK 1) To replace the front headlamp bulb on a Suzuki Splash, open the bonnet to access the components inside the engine bay. Here, you will locate the inte…
Removing the Cooling Radiator from a Suzuki Splash
Removing the Cooling Radiator from a Suzuki Splash
Suzuki Splash (2008-2015 / MK 1) This guide provides instructions for removing and replacing the engine cooling radiator of the Suzuki Splash. First, open the bonnet of the vehicle a…
How to Replace the Air Filter on a Suzuki Splash?
How to Replace the Air Filter on a Suzuki Splash?
Suzuki Splash (2008-2015 / MK 1) To replace the air filter on a Suzuki Splash, open the bonnet to access the components inside the engine bay. The air filter is located inside its bo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos