Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bulb on a Suzuki Splash

Model: Suzuki Splash MK 1 - Years 2008-2015
Part: Tail light bulb

If you notice that a rear light bulb is blown and you want to proceed with its replacement for this car model, the description below outlines all the steps to take and the necessary instructions for the replacement. First, open the boot and locate the two screws securing the light unit on the inner side. Remove the two screws, and you can then pull the light out towards you. Be careful with the rear electrical connections and disconnect the bulb holder support, replacing the blown bulb.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Suzuki Splash?
How to Replace the Front Headlamp Bulb on a Suzuki Splash?
Suzuki Splash (2008-2015 / MK 1) To replace the front headlamp bulb on a Suzuki Splash, open the bonnet to access the components inside the engine bay. Here, you will locate the inte…
How to replace the front headlight bulbs in the Suzuki Splash?
How to replace the front headlight bulbs in the Suzuki Splash?
Suzuki Splash (2008-2015 / MK 1) In this tutorial we can see how to replace the front headlight bulbs in the Suzuki Splash, an extremely simple and quick operation. First of all, mak…
How to Change the Brake Light Bulb on the Suzuki Splash
How to Change the Brake Light Bulb on the Suzuki Splash
Suzuki Splash (2008-2015 / MK 1) Learn how to change the rear light bulb on a Suzuki Splash: you will need a dual filament bulb (P21/5W) that manages both the sidelights and the brak…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos