Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the rear bumper of the Suzuki SX4

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Rear bumper

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to disassemble and replace the rear bumper of the Suzuki SX4. First of all, we open the rear tailgate of the trunk and start unscrewing all the fixing screws we find on the top and bottom of the bumper, using a 10mm socket wrench; then we unscrew the additional screws on both sides of the rear wheel arches, as shown in the video.

At this point, we gently detach the bumper on the sides until we remove it completely; let's replace it with the new one, fixing it correctly!


Posted on 11 January 2025 by ScegliAuto


Related tutorials

Instructions for Fitting a Tow Bar on Suzuki SX4 - Fiat Sedici
Instructions for Fitting a Tow Bar on Suzuki SX4 - Fiat Sedici
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In today’s tutorial video, we will see the main instructions that will allow us to fit the rear tow bar on a Suzuki SX4, as well as on a Fiat Sedici.…
Change Rear Headlight Bulb on a Suzuki Sx4
Change Rear Headlight Bulb on a Suzuki Sx4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) Changing the bulbs on a Suzuki Sx4? Remove the rear headlight bulbs on a Suzuki Sx4. Open the boot lid, and using a screwdriver, unscrew the securing…
How do you replace the headlight bulb of the Suzuki SX4?
How do you replace the headlight bulb of the Suzuki SX4?
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) It will be possible to replace the headlight bulb on the Suzuki SX4 by opening the hood, so that the screws securing the front bumper to the vehicle …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos