Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Fitting a Tow Bar on Suzuki SX4 - Fiat Sedici

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014

In today’s tutorial video, we will see the main instructions that will allow us to fit the rear tow bar on a Suzuki SX4, as well as on a Fiat Sedici. First, open the boot lid and remove the rear bumper by unscrewing the upper and lower fixing screws; also remove the screws from the wheel arches and gently pull it out. Next, remove the side plastics from the boot area and take off the plastics from the rear pillars to access the anchoring holes for the bracket; now fix the first brackets and then install the main bar behind the car's bumper. Finally, install the tow bar!

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on the Suzuki SX4 - Fiat Sedici
How to Replace the Front Headlamp Bulb on the Suzuki SX4 - Fiat Sedici
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) .. the front headlamp bulb on the Suzuki SX4 and Fiat Sedici. First, open the bonnet and remove the plastic protective cover of the bulbs; then disconnect.. …
Replacing Front Headlamp Bulb on Suzuki SX4 - Fiat Sedici
Replacing Front Headlamp Bulb on Suzuki SX4 - Fiat Sedici
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) .. bulb on a Suzuki SX4, which is similar to the Fiat Sedici. First, open and lift the bonnet of your car: then disconnect the electrical connector of.. …
Repair and service manual for the Suzuki SX4 and Fiat Sedici
Repair and service manual for the Suzuki SX4 and Fiat Sedici
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) .. manual and maintenance of the Suzuki SX4 (and the Fiat Sedici, which shares the same platform). It is an excellent tool for both a DIY mechanic and a.. …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos