Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on Suzuki SX4

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Rear bumper

See other generations:
Video tutorial

Removing the rear bumper is quite simple and does not require disassembling other elements such as the rear lights or wheel arches. Open the rear hatch and remove the first two fastening screws inside the closure line, located at the two lower corners.

Two more bolts are found along the lower line of the bumper, and finally, access the edges of the wheel arch to remove the three pressure clips and the star screw that secures the corner of the bumper to the wing. Then, detach the bumper from the side and complete the removal.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Instructions for Fitting a Tow Bar on Suzuki SX4 - Fiat Sedici
Instructions for Fitting a Tow Bar on Suzuki SX4 - Fiat Sedici
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In today’s tutorial video, we will see the main instructions that will allow us to fit the rear tow bar on a Suzuki SX4, as well as on a Fiat Sedici.…
How to disassemble and replace the rear bumper of the Suzuki SX4
How to disassemble and replace the rear bumper of the Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) In this guide, we will see the instructions that will allow us to disassemble and replace the rear bumper of the Suzuki SX4. First of all, we open th…
Replacing the Fog Light on a Suzuki Sx4
Replacing the Fog Light on a Suzuki Sx4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) Remove the broken front fog light on a Suzuki Sx4. Open the engine bay and locate the screws to remove. Take off the front bumper from the front of t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos