Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fog Light on a Suzuki Sx4

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Fog lights

Remove the broken front fog light on a Suzuki Sx4. Open the engine bay and locate the screws to remove. Take off the front bumper from the front of the car. Use a screwdriver to unscrew the securing screws located behind the light (right or left). Disconnect the fog light from its housing once all screws are removed (unplug the power connectors) and fit the new bulbs into the new unit (same size and voltage). Secure the light above the bumper, screw in the screws, and reconnect the power connectors. Turn on the headlights and check the fog light operation.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Alternator on a Suzuki SX4 2.0L
Replacement of the Alternator on a Suzuki SX4 2.0L
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) In this guide, we will cover the main instructions on how to remove and replace the alternator on a Suzuki SX4 2.0L (engine code J20B). First, lift t…
Replacement of the rear windshield wiper of the Suzuki SX4
Replacement of the rear windshield wiper of the Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Today we will discover the steps that will allow us to disassemble and replace the rear windshield wiper of the Suzuki SX4. First of all, let's move …
How to reset the tire pressure on Suzuki SX4
How to reset the tire pressure on Suzuki SX4
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the tire pressure on the Suzuki SX4, you can follow these general steps. Turn on the car: make sure all tires are inflated to the correct pr…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos