Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on the Suzuki Samurai

Model: Suzuki Samurai JB, JA, Sj40, Sj30 - Years 1989-2003
Part: Engine oil

Today, we will go through the procedure necessary to replace the engine oil and oil filter on the Suzuki Samurai, following these simple steps. First, lift the vehicle and start by unscrewing the oil drain bolt found on the sump, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter cartridge, replacing it with a new one, as shown in the video. At this point, unscrew the filler cap and top up with the correct new oil!

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil Pump on a Suzuki Samurai
How to Replace the Engine Oil Pump on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) This guide shows you how to dismantle and replace the engine oil pump on a Suzuki Samurai, as well as on a Jimny. In this case, the oil pump has alre…
Oil and Oil Filter Replacement on Suzuki Samurai
Oil and Oil Filter Replacement on Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) Open the oil filler cap located above the engine cylinder head. Lift the vehicle and locate the engine oil drain plug and the oil filter. Use a 17 mm…
How to install the Malpassi filter on the Suzuki Samurai SJ.
How to install the Malpassi filter on the Suzuki Samurai SJ.
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) Today we will see how to replace the fuel filter of the Malpassi on the Suzuki Samurai SJ. To perform the replacement, we turn off the engine and let…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos