Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Piston Rings on a Suzuki Samurai

Model: Suzuki Samurai JB, JA, Sj40, Sj30 - Years 1989-2003

In this video tutorial, you will learn how to remove and replace the piston rings on a Suzuki Samurai, following the instructions below. To carry out this operation, you need to remove the pistons by disconnecting them from the crankshaft; then remove the old rings without damaging the piston grooves. At this point, lubricate the grooves for the rings to facilitate installation; correctly insert the designated rings into each groove (they have different thicknesses based on their function), following the video until the end!

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Brake Pads on Suzuki Samurai
How to Change Brake Pads on Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) Need to replace the front brake pads on a Suzuki Samurai? Here's how to remove and change them. Lift the car to a comfortable height using a jack. Un…
Replacing the Key Battery on a Suzuki Samurai
Replacing the Key Battery on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) Removing the key barrel from a Suzuki Samurai and replacing its battery is very simple, and we will demonstrate it now. You will need a small cross-h…
Replacing the Thermostat on Suzuki Samurai
Replacing the Thermostat on Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) Lift the bonnet and place the support rod. Locate the cover containing the thermostat of your Suzuki Samurai by watching the video: note how it is in…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos