Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the oil filter of the Suzuki Ignis located?

Model: Suzuki Ignis MK 3 - Years 2016-2024
Part: Oil filter

In the previous videos, we saw how to proceed with the oil change on a 2016 Suzuki Ignis vehicle, an operation that can easily be done independently. Today, we will explain the location of the oil filter and the steps for its replacement. The first thing to do is to lower yourself to the bottom of the vehicle because the oil filter is located right next to the oil pan. To replace it, you will need to unscrew the nut that secures the filter cap with a torx key, once done you can remove it and insert the new filter, close the nut with the cap and you will have completed the job.

Posted on 28 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on the Suzuki Ignis?
How to Replace the Cabin Filter on the Suzuki Ignis?
Suzuki Ignis (2003-2008 / MK 2) To replace the cabin filter on the Suzuki Ignis, open the glove compartment located on the passenger side. Once open, detach the internal fixing clip…
Where is the cabin filter located in the Suzuki Ignis?
Where is the cabin filter located in the Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) In this video we can see where the cabin filter is located in the Suzuki Ignis and how to proceed in case we need to replace it, a very simple and qu…
How to Replace the Cabin Filter on the Suzuki Ignis
How to Replace the Cabin Filter on the Suzuki Ignis
Suzuki Ignis (2003-2008 / MK 2) To replace the cabin filter on the Suzuki Ignis, you need to detach the carpet located directly under the glove compartment on the passenger side. On…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos