Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Valve Clearance on the Suzuki Samurai

Model: Suzuki Samurai JB, JA, Sj40, Sj30 - Years 1989-2003
Part: Checks and maintenance

This guide provides instructions for adjusting the valve clearance on the Suzuki Samurai. First, open the bonnet of your car and start removing the plastic valve cover by moving aside the various wiring and unscrewing the retaining screws; then loosen the screws for the valve adjustment. At this point, adjust the valves using a feeler gauge to set them to the values indicated in the owner's manual; finally, reattach the valve cover!

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Handbrake on the Suzuki Samurai
How to Adjust the Handbrake on the Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) This guide shows you how to adjust the handbrake and replace the rear brake shoes on the Suzuki Samurai. Ensure that the rear brake shoes are in good…
How to Remove the Tensioner on a Suzuki Samurai
How to Remove the Tensioner on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) If you have reached this page, you probably intend to replace the timing belt on your Suzuki. Don't worry, I will explain how to do it step by step. …
Replacing the Key Battery on a Suzuki Samurai
Replacing the Key Battery on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) Removing the key barrel from a Suzuki Samurai and replacing its battery is very simple, and we will demonstrate it now. You will need a small cross-h…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos