Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Jimny
    4. : Removing the Suzuki Jimny power steering pump 1

Suzuki Jimny - Video tutorial

Model: Suzuki Jimny Jb43, Jb53, Jb33, Jb23 - Years 1998-2018
Part: Pump
Operation: Removing the Suzuki Jimny power steering pump 1

Today we will see, in this video tutorial, how to remove and replace the power steering pump on the first generation Suzuki Jimny. First of all we lift the car and start by removing the oil vent bolt from the power steering unit, letting it drain into a container; after which we disconnect the high pressure hose and unscrew the fixing screws of the power steering pump, disconnecting the service belt from its pulley. At this point we remove and replace the pump with the new one, connecting the belt and fixing it correctly; finally pour the new oil!


Posted on 14 July 2022 by ScegliAuto

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos