Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front door panel of the Suzuki Swift

Model: Suzuki Swift MK 6, A2L - Years 2017-2024
Part: Door trim panel

Below we will discover the instructions that will allow us to disassemble and remove the front door panel of the Suzuki Swift. First, we open the front door of the car and start by removing the plastic cover of the handle, then unscrewing all the fixing screws located on the panel; then we remove the window switch panel, disconnecting the electrical connector found underneath, as shown in the video. At this point, we lever on the sides of the panel to detach it and remove it, disconnecting the handle cable; finally, we reassemble the door trim!

Posted on 15 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of the Swift
How to Remove the Front Door Panel of the Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Is the door panel damaged? Here’s how to remove the panel from the Suzuki Swift. Unscrew the screws inside the handle and in the space where the door…
How to remove the rear door panel of the Suzuki Swift.
How to remove the rear door panel of the Suzuki Swift.
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) Below, we will discover the main information on how to disassemble and remove the rear door panel of the Suzuki Swift. First, let's open the rear doo…
How to Remove the Door Panel of the New Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) To remove the inner door panel of your new Suzuki Swift, follow the instructions in this mini guide. Turn off the car completely and enter the vehicl…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos