Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear door panel of the Suzuki Swift.

Model: Suzuki Swift AZG, MK 5, Rs41 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

Below, we will discover the main information on how to disassemble and remove the rear door panel of the Suzuki Swift. First, let's open the rear door of the vehicle and start removing the plastic cover located above the panel; then, we unscrew all the fastening screws located on its sides and on the handles, as shown in the video.

At this point, gently detach the door panel from the sides until it is completely removed, disconnecting the handle cable; finally, we reassemble the door trim by applying the reverse procedure.


Posted on 11 December 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Suzuki Swift
How to Remove the Rear Door Panel of a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Follow this video to learn how to remove the rear door panel on a Suzuki Swift. Before starting the disassembly, disconnect the battery connectors lo…
How to Remove the Front Door Panel of the Swift
How to Remove the Front Door Panel of the Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Is the door panel damaged? Here’s how to remove the panel from the Suzuki Swift. Unscrew the screws inside the handle and in the space where the door…
How to remove the front door panel of the Suzuki Swift
How to remove the front door panel of the Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) Below we will discover the instructions that will allow us to disassemble and remove the front door panel of the Suzuki Swift. First, we open the fro…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos