Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Suzuki Ignis.

Model: Suzuki Ignis MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Service warning light

See other generations:
Video tutorial

Let's see how to reset the service light on the Suzuki Ignis: before turning on the ignition, make sure that the doors, the hood, and the trunk are properly closed, then press and hold the "info" button for at least three seconds. Next, press the button located next to the "info" button until the display shows the message related to the oil change.

To confirm the selection, we will need to press the "info" button again. Press the button multiple times until "reset" appears on the display.

Press and hold the "info" button until the reset is confirmed, and finally, turn off the ignition.


Posted on 31 December 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Suzuki Ignis
How to Reset the Service Light on a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) To reset the service light on a Suzuki Ignis, you cannot use the options in the menu on the instrument cluster. You will need to connect a diagnostic…
How to Reset the Service Light on a Suzuki Ignis?
How to Reset the Service Light on a Suzuki Ignis?
Suzuki Ignis (2003-2008 / MK 2) To reset the Service light on a Suzuki Ignis, turn the key to switch on the instrument panel and press the INFO button located to the right of the sp…
Resetting the Service Light on the Suzuki Ignis
Resetting the Service Light on the Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) Discover the information that will guide you on how to reset the service light for the regular maintenance of the engine oil change on the Suzuki Ign…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos