Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fog Light Cover on the Suzuki Ignis

Model: Suzuki Ignis MK 3 - Years 2016-2024
Part: Fog lights

Let's see how to remove the fog light cover on the Suzuki Ignis: open the door and locate the plastic clip on the bumper, just behind the fog light cover. Using a clip tool, remove the central pin to take off the wheel arch liner; pull it outwards and from this opening, looking towards the back of the fog light, you will find a small screw securing the cover. Remove this screw with a screwdriver. Now from the outside of the vehicle, you can unscrew the cover; insert the clip tool into the gap created, and gently pull off the cover. Removing the screw from inside the wheel arch is essential; otherwise, you risk breaking the plastic clips.

Posted on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Suzuki Ignis key
How to replace the battery of the Suzuki Ignis key
Suzuki Ignis (2003-2008 / MK 2) Today's video will explain how to replace the key battery on a Suzuki vehicle. The steps to replace the battery of the Suzuki Ignis key are: -unscrew…
Where to Find the OBD Port on the Suzuki Ignis 2000
Where to Find the OBD Port on the Suzuki Ignis 2000
Suzuki Ignis (2000-2003 / MK 1) Thanks to the steps described in the following guide, you will be able to locate the OBD port inside your Suzuki Ignis (2000 model) in just a few sec…
Removing the Radio on Suzuki Ignis
Removing the Radio on Suzuki Ignis
Suzuki Ignis (2003-2008 / MK 2) This tutorial shows you how to remove the radio from a Suzuki Ignis. First, get into the vehicle and grab a cross-head screwdriver: unscrew the two u…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos