Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Fuel Tank from Suzuki Samurai

Model: Suzuki Samurai JB, JA, Sj40, Sj30 - Years 1989-2003

In today's video, learn how to remove the fuel tank from a Suzuki Samurai in simple steps. First, lift the car with jack stands and remove the breather pipe to drain the fuel from the tank into a container, away from heat sources. Remove the screws of the plastic cover that hides the tank, then the bolts of the tank to detach it. Carefully extract the tank from the vehicle and replace it with a new one, avoiding repairs on the old one that may lead to breakages over time.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel on Suzuki Samurai
Removing the Door Panel on Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) Do you want to remove the door panel of the Suzuki Samurai? Let’s see how to remove the cover panel from the front right door. Unscrew the securing s…
How to Replace the Suspension Bush on a Suzuki Samurai?
How to Replace the Suspension Bush on a Suzuki Samurai?
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) To replace the suspension bush on a Suzuki Samurai, access the underside of the vehicle: you will need to unscrew the bolts that secure the driveshaf…
How to Adjust the Valve Clearance on the Suzuki Samurai
How to Adjust the Valve Clearance on the Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) This guide provides instructions for adjusting the valve clearance on the Suzuki Samurai. First, open the bonnet of your car and start removing the p…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos