Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on Suzuki Samurai

Model: Suzuki Samurai JB, JA, Sj40, Sj30 - Years 1989-2003
Part: Door trim panel

Do you want to remove the door panel of the Suzuki Samurai? Let’s see how to remove the cover panel from the front right door. Unscrew the securing screws located inside the door, then pry at the internal door handle being careful not to scratch the plastics. Remove the trim around the door opening lever and the window winder. Using a plastic spatula, unclip all the clips by prying around the entire perimeter of the door panel, then pull it away using your hands. Unclip the opening lever cable after removing the cover panel.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Piston Rings on a Suzuki Samurai
How to Change the Piston Rings on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) In this video tutorial, you will learn how to remove and replace the piston rings on a Suzuki Samurai, following the instructions below. To carry out…
How to Replace the Wiper Arms on the Suzuki Samurai - Jimny
How to Replace the Wiper Arms on the Suzuki Samurai - Jimny
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) In today’s video tutorial, you will see how to remove and replace the wipers and their arms on the Suzuki Samurai, as well as the first series Jimny.…
Guide to replacing the timing belt of the Suzuki Samurai
Guide to replacing the timing belt of the Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) The following steps will show us how to disassemble and replace the timing belt of the Suzuki Samurai, following the instructions below. First, open …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos