Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Side Indicator Bulb

Model: Suzuki Ignis MK 2 - Years 2003-2008
Part: Side marker bulb

If you want to replace the bulb of the side indicator located on the right front headlamp of your Suzuki Ignis, here’s how to do it. Open the bonnet. No need to remove anything or use tools. With your left hand, reach into the engine bay and grasp the bulb holder from the back. Gently twist the bulb to the left. At this point, you can pull out the bulb holder with the burnt bulb and proceed with its replacement. Now position the new bulb as it was before, and to secure it, gently twist it to the right. The indicator is fixed!

Updated on 11 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of Right Indicator Bulb
Suzuki Ignis (2003-2008 / MK 2) In this video, you can see the replacement of the right side indicator bulb of the front light cluster on a Suzuki Ignis. The procedure is quite simp…
How to Remove the Headlamp Bulbs on a Suzuki Ignis
How to Remove the Headlamp Bulbs on a Suzuki Ignis
Suzuki Ignis (2003-2008 / MK 2) How to remove the headlamp bulbs on a Suzuki Ignis? Let's see how to replace the bulbs. Open the front bonnet by pulling the plastic lever located at…
Replacing the Rear Brake Light Bulb
Suzuki Ignis (2003-2008 / MK 2) To replace the brake bulb of the rear light, you must remove the light itself: open the rear bonnet and unscrew the fixing screws of the light along …

How to Remove the Spark Plugs on an Opel Astra

Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay.

Watch the video!


by ScegliAuto

More videos