Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Air Filter on a Suzuki Palette

Model: Suzuki Ignis MK 3 - Years 2016-2024
Part: Cabin air filter

If you need to replace the cabin air filter on this vehicle, you will find the information and instructions below and in the video. First, access the cabin from the passenger side and open the glove compartment. The filter is located behind the glove compartment, so you need to remove it to gain access. Proceed to remove the cover of the compartment containing the filter and take it out. Take the new filter and place it in the housing, close the cover, and reassemble the glove compartment.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Air Filter on a Suzuki Ignis
How to Change the Engine Air Filter on a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) In this video, we will see how to change the air filter on the Suzuki Ignis; first, open the bonnet and, by opening the clips that hold the air intak…
How to Replace the Air Filter on a Suzuki Ignis?
How to Replace the Air Filter on a Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) If your Suzuki Ignis, produced from 2016 onwards, has reached the necessary mileage for a service, it means that, among other maintenance tasks, you …
How to Change the Cabin Air Filter on the Suzuki Ignis
How to Change the Cabin Air Filter on the Suzuki Ignis
Suzuki Ignis (2003-2008 / MK 2) To replace the cabin air filter on the Suzuki Ignis, park the car on a level surface, turn off the ignition, and open the passenger door for easier a…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos